You may need about two to three hours to charge a pair of LED sneakers. Yet, how do you know when your LED shoes are fully charged?
To answer this question, let’s follow our post! You can also learn some tips for using and charging your footwear.
Table of Contents
How Do You Know When Your LED Shoes Are Fully Charged?
The LED light on your footwear blinks red while charging. If you have fully charged it, the light will turn solid green.
The charging may take somewhere from two to three hours. It would be best to give your footwear a full charge to work properly and longer.
However, overcharging will degrade the batteries and harm the circuit system inside your footwear.
If you plug the cable securely enough, but the lights on your sneakers don’t blink, inspect the batteries for any sign of breaking.
How To Charge LED Shoes?
Each shoe features a charging port that allows the shoe to be charged through USB. Here is how to charge your sneakers:
- Gently insert the cord into the charging port to avoid harming the connector.
- Connect the opposite end of the cord to a USB wall adaptor.
- The shoe will blink, indicating that it’s charging.
How Do LED Shoes Work?
A typical LED shoe features six light circuits, which run by the stress of each foot. Components of the shoe, such as the outsole, are responsive to pressure.
The pressure panel usually does not trigger on sneakers with different colors until the current color is over. Otherwise, each process will stop working.
As technology has advanced, there are newer and more creative methods to make the lights switch on and off effortlessly.
Some models allow you to change the light patterns. So, go to either brand’s website or google for your chosen model and illumination colors/patterns before making a purchase.
What Affects LED Shoe Working System?
These models have a specific working order. The following factors will reveal how effectively the footwear can perform.
Lighting mechanism
Lighting is the most critical system in a light-up shoe, making it different from other types of sneakers.
There are two types of light-up shoes on the market: pressure-activated and rechargeable.
- Pressure-activated
When you walk or stamp with these items, the built-in detectors in the shoes react, instantly flashing the lights.
Because the lights can illuminate when there is pressure, the pressure-activated footwear types are helpful for getting up and moving around.
- Rechargeable
This system has a control switch and USB charging port in the heel section of the footwear. It allows the shoe to light up until the batteries die or you switch off the light.
These rechargeable devices have a few hours of battery life. Most of them can charge quickly and have numerous light settings.
Charging and lighting time
The lighting and charging times will tell you how long it takes for the sneakers to light up and how long to charge the battery for the shoes to work properly.
Light settings
Most models have red lights. However, thanks to the advanced technology, manufacturers can add more light settings to their products, from different light colors to patterns.
Your footwear must have a more complicated lighting system to blink in various patterns and colors.
Remote control
Some models allow you to switch off the color display and halt the blinking at any time, making them perfect for wearing at any event.
This control option is a part of a pressure area, where you must apply pressure to the footwear to stop the flashing.
You can find products that enable you to adjust the flashing light on mobile apps.
What Damaged LED Shoe Batteries?
Regular shoes can withstand pressure and work in rough conditions.
However, models with built-in lights are more sensitive because of the battery circuit. If they break down, you can blame them for these reasons.
Heat
Do not expose your sensitive footwear to excessive heat. Otherwise, they will rupture or bubble up.
Instead, keep these items in a cool, well-ventilated location. Even a few minutes to the heat may harm the circuit.
Moisture
Once water leaks into the LED casing, it will cause the metal within to deteriorate and damage the electric circuit. So, the lighting system will suffer.
Do not immerse your shoes in water or step on ponds to prevent this incident. Otherwise, the footwear can’t flash anymore.
Impact
The cables in the footwear can disconnect as you walk. This problem happens when you kick something or scratch your shoe against a hard, sharp object.
Overuse
Overusing and excess charging degrade your footwear over time. The best way to avoid this problem is only to wear these sneakers on special occasions.
How To Change Batteries In LED Shoes?
If the existing batteries break down, you can change them instead of buying new items. However, this task is not easy. Please follow the steps below to simplify it.
Step 1: Access the compartment
Look for a little hole or button on the heel of your footwear to unlock the compartment.
Once you can access the battery pack, slip a screwdriver into this slot and pull it out. If neither of these places has an opening, check underneath the insole.
Step 2: Remove the old batteries
While going inside the footwear, try pulling up on the heel part of the sole with your fingertips. Press the insole between your index finger and thumb if it’s hard to release.
If this method doesn’t work, use a screwdriver or a nail file to pull it out by slipping the tool’s head underneath the insole’s edge.
Check if the batteries are still in proper working order by removing them. You can use a screwdriver or a file for this step.
The battery type used for these products varies depending on the footwear; AA, AAA, or even watch batteries can work. Remember to dispose of used batteries.
Suppose you’re not sure what type of batteries your footwear needs; do not insert any battery randomly. You can ask the store to figure out the right one.
Step 3: Insert new batteries
Insert the new batteries by pressing them securely into place with a screwdriver or a file.
Place the footwear on the floor. Then, use your hand to press on the insole near the heel to test the batteries.
If the sneaker doesn’t brighten up, double-check that you’ve inserted all the batteries properly.
Step 4: Close the compartment
Put the sole back into position using a rubber cover or a screwdriver to seal the compartment.
After double-checking that the battery tab is tight, stamp your foot into position to ensure it’s secure.
Frequently Asked Questions
The following questions will give you more information about using and charging these sneakers. Let’s check!
1. How long can the batteries last in LED shoes?
The average battery life for these shoes is between 5 and 8 hours of lighting up. Nevertheless, it is contingent on some factors, such as:
- Flashing strength and color patterns: A single-colored and single-patterned footwear requires less power to flash than ones with multiple colors and patterns.
- Usage: You may use your sneakers to walk or run. Running consumes more energy than walking.
- Shoe quality: High-quality LED sneakers can work longer after a charge than poorly-made models.
2. How much time do LED shoes take to charge?
Several factors, such as brand or charging port, affect the charging time of your sneakers. Often, they need two to three hours to charge fully.
Also, please note how often you wear the footwear and in what environment.
It will have a significant impact on how long the battery takes to charge entirely and the runtime of the footwear after a full charge.
3. How can I turn on lights in these LED flashing shoes?
There is a charging port inside the footwear and a switch nearby.
When you press on the switch, the lights will flash. You can also change the light colors and patterns by pressing the switch.
4. How can I charge light flashing shoes?
These sneakers have a USB cable to help charge both shoes. All you have to do is connect the wire to the charging port in each shoe.
Conclusion
You can observe the light on your light-up footwear to determine if you have fully charged it.
If there isn’t any change after hours of charging, the batteries may have some problems. You can follow the guidelines described above to give them a treat.
Hopefully, you will find this article helpful. For any further information, please feel free to ask. Thank you for reading!