Everyone loves their Converse shoes, but with everyday wear and tear, they can quickly become scuffed, grimy, and dull.
Fortunately, with just a few supplies, it’s easy to keep your Converse shoes looking as good as new.
In this article, we’ll show you a simple trick for cleaning your rubber Converse shoes and restoring them to their former glory.
We’ll guide you through gathering the necessary supplies, brushing away dirt and dust, making a cleaning solution, wiping down the shoes, and focusing on specific areas.
We’ll also show you how to rinse and air-dry the shoes for a perfect finish.
With this guide, you’ll be able to keep your Converse shoes looking like new!
Table of Contents
Short Answer
To clean the rubber on Converse shoes, start by mixing a solution of warm water and a mild detergent.
Use a soft cloth or toothbrush to apply the solution to the rubber and scrub gently.
Rinse the shoes off with clean water and let them air dry.
To keep the rubber looking its best, apply a thin layer of petroleum jelly after they are completely dry.
Gathering Supplies
Gathering the right supplies is essential for cleaning your rubber Converse shoes. To ensure a thorough clean, youll want to have the following items on hand: a soft-bristled brush, mild detergent, a cleaning cloth, and clean water. Make sure to use a brush that wont scratch or damage your shoes, and a mild detergent that wont strip away the material. Avoid harsh detergents, soaps, or abrasive brushes, as these can cause damage. Additionally, its best to use lukewarm water, as hot water can cause damage to the rubber material. Once youve gathered your supplies, youre ready to start cleaning your Converse shoes.
Brushing Away Dirt and Dust
When it comes to cleaning rubber Converse shoes, one of the most important steps is to brush away dirt and dust.
This is especially important if the shoes have been previously worn and not cleaned in a while.
To do this properly, you will need to get a soft bristled brush.
This is important as a too stiff brush could scratch the rubber surface of the shoes.
Start by brushing the surface of the shoes in small circular motions, focusing on the areas that are most likely to be dirtied such as the toe box, the sides, and the heel.
The key here is to be gentle as too much pressure could damage the rubber surface of the shoes.
Once you have brushed away the dirt and dust, you can move onto the next step, which is to make a cleaning solution.
Making a Cleaning Solution
Making a cleaning solution for your rubber Converse shoes is an important step in the cleaning process.
When it comes to making a cleaning solution, you should always opt for something mild and gentle.
Choose a mild detergent or soap, such as a baby shampoo or dish soap, and mix it with warm water.
This combination will create a gentle solution that wont damage the rubber material.
Its also important to note that you should avoid using any abrasive or harsh cleaning products that contain bleach, vinegar, or other powerful chemicals.
These products can be too harsh for the rubber material and can cause discoloration or damage.
Once youve created your cleaning solution, you can dip a cleaning cloth into the solution and use it to wipe down your shoes.
Make sure to pay special attention to the areas around the laces and the sole.
This will help to remove any built-up dirt or grime thats stuck to the rubber surface.
After youve wiped the shoes down, rinse them with clean water to remove any remaining soap or detergent.
Then, let your shoes air-dry.
By following these simple steps, you can easily clean your rubber Converse shoes and make them look as good as new.
With a little know-how and the right supplies, youll have your shoes looking great in no time.
Wiping Down the Shoes
Once you have brushed away any dirt and debris, its time to move on to the next step: wiping down your rubber Converse shoes. To do this, you will need a soft cloth and a cleaning solution. The best type of cleaning solution to use on rubber Converse shoes is a mild detergent mixed with warm water. This will help to gently remove any stubborn dirt or stains without damaging the material.
When your cleaning solution is ready, dip the cloth into it and begin to wipe down your shoes.
Start at the top and work your way down, paying special attention to areas like the laces and the sole.
Make sure to clean off any dirt or marks that may have accumulated in these areas.
Be sure to use gentle pressure to avoid damaging the rubber material.
Once the shoes have been thoroughly wiped down, rinse them with clean water to remove any remaining dirt or cleaning solution.
After that, let your rubber Converse shoes air-dry before wearing them again.
Focusing on Specific Areas
When it comes to cleaning Converse shoes, one of the most important things to keep in mind is to focus on specific areas.
While it is important to wipe down the entire shoe, there are certain areas that require extra attention.
To clean your rubber Converse shoes effectively, take special care to brush away dirt and dust from the areas around the laces and the sole.
These areas are prone to collecting more dirt and dust, so its important to give them a thorough scrubbing.
Use a soft bristled brush to gently remove the dirt and dust that has accumulated on the shoes.
Once you have brushed away the dirt and dust, you can make a cleaning solution with warm water and mild detergent.
Use a cleaning cloth to dip into the solution and wipe down the shoes, taking care to focus on the areas around the laces and sole.
Make sure to rinse the shoes with clean water afterwards to remove any residue from the cleaning solution.
Finally, allow the shoes to air-dry.
With a few simple steps, your rubber Converse shoes will look brand-new.
Taking the extra time to focus on specific areas, such as the areas around the laces and the sole, will help you make sure that your shoes are as clean as possible.
Rinsing with Clean Water
Rinsing your rubber Converse shoes with clean water is an important step in the cleaning process.
This will help to remove any cleaning solution residue and dirt that may have been left behind.
To do this, fill a bucket or bowl with clean, warm water.
Then, dip the cleaning cloth you used earlier into the water and use it to rinse the shoes.
Make sure to cover every area of the shoes, paying special attention to the laces and sole.
Once the shoes have been rinsed thoroughly, take them outside and let them air-dry.
Its important to avoid using a blow dryer or any other heat source to dry the shoes, as this could damage the rubber.
After the shoes have dried completely, youll be able to enjoy your freshly cleaned Converse shoes.
Air-Drying the Shoes
Air-drying your rubber Converse shoes is an important final step in the cleaning process.
To do this, place the shoes in a well-ventilated area away from direct sunlight.
This will help ensure that the shoes dry properly and wont become damaged.
If possible, turn the shoes upside down and prop them up on something so that air can circulate all around them.
This will help them dry faster and more evenly.
You can also stuff the inside of the shoes with newspaper to help them hold their shape.
Once the shoes are dry, you can wear them with pride and show off your immaculately-cleaned Converse shoes.
Final Thoughts
Cleaning your rubber Converse shoes doesn’t have to be a daunting task.
With the right supplies and a few simple steps, you can bring your shoes back to their former glory.
Start by brushing away dirt and dust, followed by making a cleaning solution with warm water and mild detergent.
Then, wipe down the shoes, paying special attention to the areas around the laces and the sole.
Finally, rinse the shoes with clean water and let them air-dry.
Now that you know how to clean your rubber Converse shoes, you can make sure they always look their best.