Combat boots are an essential piece of footwear for anyone who spends time outdoors or in harsh conditions.
However, the sole of the boot can easily wear down over time, leaving you with a boot that isn’t as durable or capable.
If youre looking for ways to fix combat boots sole, then youve come to the right place! In this article, well walk you through the process of removing the old sole, choosing the right new sole, applying contact cement, and attaching the new sole so that your combat boots are as good as new.
So, lets get started!
Short Answer
To fix combat boots sole, first remove the old sole by using a flat-head screwdriver to pry the sole away from the boot.
Then, use a utility knife to cut away any excess material.
After that, use a glue designed specifically for shoe soles and glue the new sole piece onto the boot.
Finally, use a hammer to secure the sole and let it dry before wearing the boots.
What You Will Need
If you want to fix the sole of your combat boots, youll need a few basic tools and supplies.
First, youll need a knife or razor blade to carefully remove any remaining pieces of the old sole.
Youll also need a pair of pliers to help remove the laces and trim the edges of the sole.
Finally, youll need contact cement to help secure the new sole in place.
Other supplies you may need include a dust mask, measuring tape, and sandpaper.
Make sure to have all these supplies on hand before beginning the repair process.
Removing the Old Sole
Removing the old sole from combat boots is the most important step in the repair process.
This is because you need to make sure that any remaining pieces of the old sole are removed before you attach the new sole.
To do this, you will need a sharp knife or razor blade.
Start at one end of the boot and carefully work your way around, gently scraping away any of the old sole that is still attached.
Make sure to be extra careful not to damage the leather of the boot while you are doing this.
Take your time and be thorough, so that all of the old sole is removed and you have a clean surface to attach the new sole.
Once you have completed this step, you are ready to prepare the boot for the new sole.
Preparing the Boot for the New Sole
Once the old sole has been removed, the boot must be prepared for the new sole.
This involves cleaning the surface of the boot to ensure that the new sole will adhere properly.
Use a damp cloth to wipe away any dirt and debris, then use a soft brush to clean away any stubborn residue or grime.
If necessary, use rubbing alcohol to remove any oils or waxes that may be present on the surface.
Once the boot is clean, it should be allowed to dry completely before beginning the next step.
Once the boot is clean and dry, its time to prepare it for the new sole.
Use a fine-grit sandpaper to lightly sand the area where the new sole will be attached.
This will create a rough surface that will help the contact cement to adhere properly.
Once the sanding is complete, use a damp cloth to remove any dust or debris created during the process.
Allow the boot to dry completely before moving on to the next step.
Choosing the Right New Sole
Choosing the right new sole for your combat boots is an important part of the repair process.
You’ll need to choose a sole that is compatible with the material of your boot, as well as one that provides the level of grip and support you need for your activities.
Leather soles are a popular choice for combat boots, as they are durable and provide great traction.
Rubber soles are also a good option, as they offer more cushioning and flexibility than leather.
Additionally, you may want to consider a composite sole, which combines the benefits of both leather and rubber.
Whichever type of sole you choose, make sure it is the right thickness and size for your particular boots.
Applying the Contact Cement
Once all the pieces of the old sole have been removed, the boot should be prepared for the new sole.
This can be done by applying contact cement to both the boot and the new sole.
Contact cement is an adhesive that bonds two surfaces together.
It is important to make sure both surfaces are clean, free from dust and debris, and that the contact cement is applied evenly.
To apply the contact cement, first spread a thin and even layer over the boot.
Allow the cement to dry, and then apply a second layer to the new sole.
Once the cement has dried on both surfaces, the new sole can be attached.
It is important to ensure a tight fit and a secure bond, so use a sharp knife or razor blade to trim any excess material from around the edges.
Once the new sole is securely attached, it is ready to wear.
Attaching the New Sole
Attaching the new sole is the final step in fixing combat boots and the most important one to ensure a tight fit and secure bond.
It is best to begin by preparing the boot with contact cement.
After cleaning the surface of the boot with a cloth, apply the contact cement to the sole and boot.
Make sure to cover the entire surface to ensure an even fit.
Allow the cement to dry for a few minutes before attaching the new sole.
Once the new sole is ready, carefully line it up with the boot and press it into place.
Start from the back of the boot and work your way to the front.
Make sure to press down firmly on the edges to ensure the sole is firmly attached.
Allow the cement to dry for several hours before wearing the boots.
To ensure a tight fit, you may also want to use a sewing machine to sew the sole to the boot.
This is a bit more complicated than just using contact cement, but it will make sure that the sole is firmly attached and won’t come loose.
To sew the sole, start by laying the boot flat on the ground with the sole facing up.
Line up the edges of the sole and boot and carefully sew them together using a leather needle and thread.
Make sure to use even and tight stitches to ensure a secure bond.
Once you have finished sewing, you can trim off any excess thread and you’re done!
With these simple steps, you can easily fix the sole of a combat boot and make sure it is back to its best in no time.
Finishing the Job
Once the old sole has been removed and the boot prepared for the new sole, the next step is to attach the new sole.
To do this, you will need to use contact cement.
This glue is designed to bond quickly and securely, so make sure you use it correctly.
Start by applying the adhesive to the boot and the sole, ensuring that they are evenly covered.
Once the glue is applied, you can press the sole into place and hold it there for a few minutes while the glue sets.
Make sure that the sole is secure and that there are no gaps between the boot and the sole.
Finally, use a hammer to tap the sole into place, ensuring a tight fit and a secure bond.
With a few simple steps, your combat boots can be back to their best in no time.
Final Thoughts
By following the steps outlined above, you can easily fix your combat boots sole.
With the right tools, supplies, and a bit of patience, you can have your boots looking as good as new in no time.
So, don’t wait any longer – get started on your combat boots repair project today!