How To Make Combat Boots? (A Step-By-Step Guide)


Do you want to make your own pair of combat boots? It might sound intimidating, but it’s actually not too difficult once you know how! With this step-by-step guide, you’ll be able to make your own custom-made combat boots in no time.

We’ll cover all the materials you’ll need to get started, as well as the different steps involved in the process, from preparing the leather to adding the soles and laces, and finally weatherproofing the boots for long-lasting wear.

Let’s get started!

Short Answer

Making combat boots requires a few simple materials and steps.

Firstly, you need to gather leather, thread, and a needle.

Then, cut the leather into a boot shape and stitch the pieces together.

Finally, attach a rubber sole to the boot and punch in eyelets for the laces.

With these steps and materials, you can make your own combat boots in just a few hours.

Materials Needed

Making your own combat boots is an exciting and rewarding project, and the right supplies will make the process much easier.

You will need a pattern, leather, a sewing machine, a few tools, and some patience.

The pattern can be found online or purchased from a craft store.

Make sure you pick a pattern that is the right size for your feet.

Leather can be purchased from a craft store or online.

Make sure to choose a sturdy leather that will hold up to wear and tear.

You will also need a sewing machine, scissors, needles, thread, and a few other tools.

You may also want to pick up some weatherproofing to help protect your boots from the elements.

With the right supplies, you will be able to make a quality pair of combat boots that will last for years to come.

Preparing the Leather

One of the most important steps when making your own combat boots is preparing the leather.

There are several types of leather available, and each type offers its own set of benefits.

For combat boots, youll want to choose a thicker, heavier leather that is both durable and flexible.

Youll also want to choose leather that has been properly treated to resist water and dirt.

Its important to note that leather can shrink or expand when wet, so you should be careful with the type of leather you choose.

Once youve chosen the leather youll be using, its time to trace the pattern onto it.

You can either use the paper pattern that came with your supplies or create your own.

Using a pen or marker, trace the pattern onto the leather, making sure to follow the lines closely.

Once youve finished tracing, use a pair of sharp scissors or a utility knife to cut out the pieces.

Be sure to cut slowly and evenly, as a mistake here can be difficult to fix.

Once all of the pieces are cut out, its time to start sewing.

Tracing and Cutting the Pattern

When it comes to making your own combat boots, it is important to start with the right pattern.

This will ensure that your boots have the right fit and look.

To find a pattern, you can search online or buy one from a craft store.

Once you have your pattern, trace it onto the leather and cut it out with a sharp pair of scissors.

If you are using a pre-made pattern, make sure to follow the instructions closely to get the best results.

For a more custom fit, you can use a tailor’s tracing wheel to trace the pattern onto the leather and then cut it out.

Take your time and be precise in your cutting, as this will affect the overall look of your boots.

Sewing the Pieces Together

Once you have all of your pieces cut out and ready to go, its time to start sewing them together.

To do this, you will need a sewing machine and some leather needles.

Before you start, make sure that all of the pieces are lined up properly and that the edges are even.

If needed, you can use an awl to punch the leather to make sure the stitches stay in place.

Starting at the toe, sew the pieces together using a straight stitch, making sure to backstitch at the beginning and end.

When you get to the heel, you may need to sew the pieces together in a few different passes, as the leather is thicker in this area.

As you sew, make sure to keep the stitches as even and straight as possible, as this will help the boots last longer.

Once youve completed the stitching, its time to add the soles and laces.

Adding the Soles and Laces

Adding the soles and laces to your combat boots is a crucial step in the process of creating a finished product that is both comfortable and durable.

The soles of your boots will provide the necessary traction and protection from the elements, and the laces will ensure that the boots fit snugly and securely.

To begin, youll need to select the type of sole and lace that is right for your boots.

For soles, you can choose between rubber or leather.

Rubber soles are more durable and provide better traction, while leather soles provide a softer feel and a more classic look.

For laces, youll have to decide between cotton, nylon, or synthetic.

Cotton laces are the most affordable, but they are not as durable as the other two options.

Nylon and synthetic laces are more expensive but provide better durability and a more secure fit.

Once youve selected the materials for your soles and laces, youll need to attach them to the boots.

Start by attaching the soles to the bottom of the boots with either glue or a sewing machine.

If youre using a sewing machine, make sure to double stitch the seams for added strength and durability.

Next, attach the laces to the top of the boots.

Begin at the eyelets and make sure to evenly distribute the tension between the eyelets.

If you have any extra lace, tie a knot at the end.

Finally, add a coat of weatherproofing to the soles and laces to protect them from the elements.

This will help to extend their lifespan and keep them looking great for years to come.

With the right supplies, tools, and a bit of know-how, you can make your own pair of combat boots that will last for years to come.

With a little bit of patience and the proper steps, you can create a pair of boots that will provide you with style, protection, and comfort for any outdoor activity.

Finishing the Boots

The finishing touches are an important part of making your own combat boots.

After the pieces have been cut out and sewn together, you will need to add the soles and laces.

The soles should be made from a durable material such as leather, rubber, or synthetic materials.

You can either purchase pre-made soles or create your own custom soles from a pattern.

Once the soles are attached, its time to lace up the boots.

You can use either round or flat laces, depending on your preference.

Make sure to keep the laces tight and secure as they will help keep your feet secure while walking.

Finally, you will want to apply a coat of weatherproofing to the boots.

This will help protect the leather from the elements and give them a longer life.

There are a variety of weatherproofing products available, so make sure to follow the instructions on the packaging.

Once the weatherproofing has been applied, your boots are ready to wear!

Weatherproofing the Boots

Weatherproofing the boots is an important step in the combat boot-making process.

Not only does it add a layer of protection against the elements, but it also helps to maintain the overall quality of the boots.

Weatherproofing will help prevent the leather from drying out or cracking, as well as keep the boots looking good for years to come.

The first step in weatherproofing the boots is to clean them thoroughly with a damp cloth.

This will help remove any dirt or debris that may have accumulated on the boots during the manufacturing process.

Once the boots have been cleaned, its time to apply the weatherproofing.

Youll need a waterproofing spray thats specifically designed for leather, as well as a clean, dry cloth.

Spray the boots with the waterproofing spray and then use the cloth to wipe it off and buff the boots.

Make sure to apply the waterproofing spray in even, thin coats and allow it to dry completely before wearing the boots.

Once the waterproofing has been applied, its time to add a final layer of protection.

You can use a leather conditioner to moisturize the leather and help it retain its natural oils.

This will help the boots remain supple and flexible, as well as help them resist water and other elements.

Make sure to follow the directions on the leather conditioner and apply it in thin, even layers.

By taking the time to weatherproof your combat boots, youll be able to keep them looking good and lasting longer.

With a little bit of effort and the right supplies, you can make your own pair of combat boots that will be ready for anything.

Final Thoughts

Making your own combat boots is a rewarding and fulfilling experience.

With the right supplies and a little bit of know-how, you can create a stylish and durable pair of boots that you can be proud of.

Now that you know the basics of how to make combat boots, why not give it a try and make your own pair today? You’ll be glad you did!

James Dylan

James is a journalist who specializes in sports journalism. In addition to his passion for writing, he also loves running. He knows which shoes are best for running and which are ideal for sports. He is happy to offer valuable advice on shoe-related matters.

Recent Posts