How to Stop Vans Shoes from Squeaking? (4 Simple Solutions)

Do you have a pair of squeaky vans that you just can’t seem to get rid of? Does it seem like no matter what you do, you just can’t seem to stop the annoying sound? You’re not alone! Many people experience the same problem with their shoes.

Fortunately, there are a few simple solutions that you can try to help stop your shoes from squeaking.

In this article, we’ll be exploring four easy steps to help you get rid of the squeak and get back to enjoying your shoes.

We’ll review what causes shoes to squeak, how to clean the bottom of your shoes, and a few other solutions to try.

So let’s get started and see how to stop those squeaky shoes!

Short Answer

1. The best way to stop vans shoes from squeaking is to apply a waterproofing agent such as a spray-on waterproofer or a wax-based waterproofer.

2. Make sure to apply the waterproofer to the areas of the shoe that are most prone to squeaking, such as the sole and the upper part of the shoe.

3. Allow the waterproofer to dry completely before wearing the shoes to ensure the best effect.

4. If the squeaking persists, you can also try applying a thick layer of talcum powder or baby powder to the inside of the shoe.

What Causes Shoes to Squeak?

When it comes to why your shoes might be squeaking, there are a few potential culprits.

The most common cause is dirt and debris that gets stuck between the sole of the shoe and the surface you are walking on, creating friction and resulting in a squeaky sound.

Another potential culprit is moisture that has gotten stuck between the sole of the shoe and the surface you are walking on.

Moisture can cause the shoe to expand, leading to squeaks when you walk.

Lastly, the materials used to make the shoe can also be a factor.

Some shoes are made with materials that can be more prone to squeaking than others, such as leather or synthetic materials.

No matter what the cause, you can stop your shoes from squeaking with a few simple solutions.

Clean the Bottom of Your Shoes

Having squeaky shoes can be a real annoyance, especially when you’re in a public setting.

Fortunately, there are a few simple steps you can take to prevent the squeaking and keep your shoes quiet.

The first step is to clean the bottom of your shoes with a damp cloth.

This will remove any dirt and debris that could be causing the squeaking.

Be sure to pay special attention to the seams of the shoe, as dirt can accumulate there.

Afterward, use a dry cloth to remove any excess moisture.

This will help reduce the chances of the dirt and debris from causing further squeaking.

Apply Baby Powder or Talcum Powder

When it comes to stopping your Van shoes from squeaking, applying baby powder or talcum powder is one of the most common solutions.

Not only does it help reduce friction, but it is also a safe and easy method that anyone can do.

To apply the powder, you should first use a dry cloth to remove any dirt and debris from the bottom of the shoes.

Then, take some baby powder or talcum powder and sprinkle it generously over the entire sole of the shoe.

Make sure to cover the entire area, including the sides and the heel.

Once the powder is applied, use a brush or your hand to work it into the shoe’s sole and get into all the nooks and crannies.

This will help ensure that the powder is evenly distributed and that no areas are left untreated.

You should also pay special attention to any areas that seem to be squeaking more than others.

After the powder is applied, you should allow it to sit for a few hours, or overnight if possible, so that the powder can work its magic.

Finally, use a vacuum to remove any excess powder.

With this simple and effective method, you should be able to stop your Van shoes from squeaking in no time.

Try a Shoe Spray

Shoe spray is a great solution for squeaky shoes, as it can help reduce friction and make the shoe’s surface smoother.

It is an easy and mess-free solution that can be done in just a few minutes.

To use a shoe spray, start by shaking the can vigorously and then spraying the bottom of the shoe with a thin layer of the product.

Make sure to spray in a well-ventilated area and avoid spraying too much, as this can damage the shoe’s material.

Let the shoe spray sit for a few minutes before wiping off any excess with a dry cloth.

The shoe spray will help reduce friction and should help stop the squeaking.

It is important to note, however, that this solution is only temporary and may need to be reapplied if the squeaking persists.

Wear Socks or No-Show Socks

Wearing socks or no-show socks is an easy and effective way to stop your Vans shoes from squeaking.

Your socks will act as a cushion between the sole of your shoe and your foot, reducing friction and therefore reducing the noise.

If you prefer the look of no-show socks, you can opt for a thin pair of no-show socks that will still provide a cushion between your foot and the sole of your shoe.

It may take a few tries to find a pair that fit just right, but it will be worth it in the end when you have a silent pair of Vans shoes.

Additionally, it’s important to make sure your socks are clean and free of debris, as dirt and debris can also cause your shoes to squeak.

Replace the Insoles

Replacing the insoles of your Vans shoes is another simple solution to stop them from squeaking.

Over time, the insoles can become worn down and compress, leading to loud squeaking noises when you walk.

There are plenty of foam and gel insoles available on the market that are specifically designed to provide cushioning and reduce friction, ultimately helping to keep the noise to a minimum.

To replace the insoles of your Vans shoes, first remove the existing insoles and discard them.

Carefully measure the inside of your shoes and find an insole that fits properly.

Once you have the right size, insert the new insoles and press them firmly into place.

This should reduce the squeaking and give you peace of mind that your shoes are comfortable and quiet.

Use Glue or Shoe Goo

Using glue or shoe goo is an effective solution for stopping your Vans shoes from squeaking.

This method works by filling in the cracks and crevices between the sole and upper of the shoe, creating a more secure bond and eliminating the noise caused by friction.

To use glue or shoe goo to stop your Vans from squeaking, start by cleaning the bottom of the shoe with a damp cloth to remove any dirt and debris.

Next, apply a thin layer of glue or shoe goo to the bottom of the shoe, taking care to fill in any holes or cracks.

Allow the glue or goo to dry completely before wearing the shoes, as this will ensure the adhesive successfully holds the shoe together.

Once the glue or goo has dried, you should have a squeak-free shoe!

Final Thoughts

No one likes having to deal with squeaky shoes! But with a few simple steps, you can easily stop your vans shoes from squeaking.

Clean the bottom of your shoes, apply baby powder or talcum powder, use a shoe spray, wear socks or no-show socks, replace the insoles, and use glue or shoe goo.

With these solutions, your shoes will be squeak-free in no time.

So why not take a few minutes and try these solutions today to put an end to your squeaky shoes!

James Dylan

James is a journalist who specializes in sports journalism. In addition to his passion for writing, he also loves running. He knows which shoes are best for running and which are ideal for sports. He is happy to offer valuable advice on shoe-related matters.

Recent Posts