Clarks Desert Boots capture the hearts of many thanks to their outstanding quality, natural leather materials, and eye-catching designs.
But when it comes to waterproofing, many people get confused, and we understand why.
Most people want to get a pair of waterproof boots, which allows them to move freely in high humidity environments.
With that in mind, you might be wondering about the waterproofness of Clarks desert boots. So are Clarks desert boots waterproof?
How to waterproof Clarks desert boots? Let’s explore!
Table of Contents
How to Waterproof Clarks Desert Boots?
Thoroughly Clean the Leather
Before waterproofing your boots, it is essential to clean their surface. Here is how to do it:
Step 1: Take Apart the Laces From Your Clarks Boots
You will need to remove the laces of your boots before starting this project.
Otherwise, it will interfere with the cleaning and waterproofing of your boots.
You must put these laces in a safe place as you will need to reattach them to your boots later.
Step 2: Remove Dirt From Leather Surface.
Once you’re done with the lacing, you’ll need to remove any mud or dirt from your boots. All you need to do is firmly hold your boots against each other before knocking them.
Step 3: Clean the Leather Using Cleaning Gel
In most cases, cleaning gels are available in aerosol cans, allowing you to spray them on your boots’ leather surface easily and quickly.
These aerosol cans have instructions. So it’s best to follow their instructions.
After applying the gel to your boots, you should leave it there for an hour. Then, rub off the gel and dirt collected from the leather using one clean rug.
If you don’t have cleaning gels, using a mixture of white vinegar and water (1:1 ratio) is okay.
Step 4: Rinse and Dry Your Boots.
You need to run the boots under a gentle stream of water from your bathroom tub or sink. Soaking them is unnecessary.
After cleaning the boots’ leather, turn off the faucet and transfer them to the dry place.
In most cases, your boots will take about a day (24 hours) to dry completely. However, you can leave them outside on sunny days to speed up drying.
If you want your boots to dry even faster, get two sheets of paper, such as newspaper, to lay around them.
The paper will draw moisture from the leather and make your boots dry faster.
Avoid using a dryer to dry your boots as it can crack the leather.
Step 5: Rub Conditioning Oil Into Your Boots’ Surface.
Once your boots are completely dry, it is time to rub the conditioning oil.
All you need to do is take an adequate amount of conditioner and rub it into the leather while holding your boots from the inside with your other hand.
Many people do not take this step. However, it is essential as the leather material must be conditioned to retain moisture.
This step will allow your leather boots to look shiny and not dry out over time.
Leather Waterproofing
Once you’ve finished cleaning your Clarks’ boots, you can effectively waterproof them.
Method 1: Apply Waterproof Wax to the Boot Leather
It is easy to buy waterproof wax, usually contained in plastic or tin cans. You will need to dip a clean rag in the waterproof wax.
Then, use it to massage the wax onto the leather surface of your boots in a circular motion.
We recommend waterproofing your Clarks’ desert boots at least once a year to prolong their life.
Method 2: Use Waterproof sprays
Applying waterproofing spray is okay if you don’t have much time to waterproof your boots.
Those sprays are available in aerosol cans, so all you need to do is spray the waterproof spray on the leather boots.
Remember that never rub waterproofing spray. You should follow the instructions on the package for the best results.
Leave Your Clarks Desert Boots Dry
Whatever waterproofing method you choose, let your boots dry to allow their leather to absorb the chemicals before wearing them.
To speed up the drying process, you can dry your boots in the sun or put them under a fan at room temperature.
Then they will be waterproof and ready for you to put on.
Are Clarks’ Desert Boots Worth it?
Clarks Desert boots are made from excellent leather that can withstand the weather. They also come with crepe rubber soles, considered the softest sole on the market.
These boots are known for their simple design, excellent leather quality, and maximum comfort. In addition, their soles are also very soft and delicate.
Clarks boots also come with enough padding to add comfort to everyday use. So yes, these boots are worth it!
Are Clarks Desert Boots Waterproof?
Clarks desert boots are made of pure leather, which can be molded into various styles while preserving structural integrity.
But porous, natural materials like leather will not be fully waterproof.
Clark uses its famous GORE-TEX membrane to protect their boots in all climates. So its products can withstand all weather amazingly.
Unfortunately, they won’t be water resistant, a common feature of natural leather boots.
However, not being waterproof is the only problem with these fantastic boots.
Clarks Desert Boots are still worth owning for many good reasons, and the good news is that you can waterproof them yourself.
Take Away
By now, you should know how to waterproof Clarks desert boots. It is an easy process, but its results will amaze you.
Waterproofing your Clarks Desert boots will allow you to walk more comfortably in high humidity environments.
Thanks for stopping by!