When it comes to tying your shoelaces, it’s not only a matter of threading the wire through the holes but also some touch of artistry.
How to lace navy dress shoes? Look no further than this article! It will recommend some of the most common techniques to tie this footwear.
Let’s scroll down to discover it in detail!
Table of Contents
Why Are Lacing Techniques Important?
Many people tie their shoelaces arbitrarily. However, how you lace your shoestring will be more important than you think.
There are several good reasons you should learn how to knot your shoelaces correctly.
Many people prefer the navy lace method simply since it looks nice. However, it also comes with many benefits.
You may improve the functioning of your shoes by making them comfier or tying them in a way that gives your ankles and feet more fantastic support.
If you have broad feet, you can utilize the eyelets nearer to your ankle and leave the eyelets close to your toes vacant.
That is where your toes are the broadest and require extra breathing space.
On the other hand, people with high vaults would choose to use gap fastening to provide more space for the apex of the foot.
For these reasons, good tying is vital for a variety of reasons. If you have a pair of navy dress shoes, keep reading to know the art of tying.
How To Lace Navy Dress Shoes?
There are many ways to tie up navy dress shoes. Below are the most common techniques to consider:
Ladder Lacing
Begin at your foot’s bottom, closest to your toes, and work your way up to the top.
Thread the strings into the inner side of the bottom row while ensuring the end of the laces are facing up.
Now you can see the lace. It is outside. Thread every single end of the lace into the subsequent vacant vertical hole above it.
Cross each lace end to the opposite side, but avoid pulling the string outside just yet.
Before you draw it out, wrap each end of the thread around the vertical position you made earlier.
Keep it as straight as possible, then proceed up through another eyelet. That’s why the shoelaces should be longer when using the technique.
Keep doing until the lace is strung through all eyelets. You may tighten the string inside your footwear once you’ve used up all the eyelets.
As its name suggests, the outcome looks precisely like a ladder.
Cross Lacing
Anyone learning how to tie naval footwear style will find that cross lacing or criss-cross technique is useful.
Due to the way this diagonal technique works, it’s also known as the over-under way.
The criss-cross technique entails repeatedly passing the string from the inner side to the exterior.
Starting from the bottom center set of eyelets, draw the lace vertically from the interior out. Check for evenness on both sides by measuring.
While crossing the strings on the interior, ensure the cross is visible.
When you reach the next set of eyelets, repeat the process, threading the knot from inside out.
Because the laces are continuously crossing, every lace will look diagonal once you’ve made the first horizontal line.
Army Lacing
Army lacing seems the same as the ladder tying technique discussed earlier.
If you want to go all-out army style, get a pair of army boots and tie them up like soldiers often perform in the military.
Place the criss-cross on the interior and the vertical lines on the exterior, just like when you practice tying army boots with ladder lacing technique.
This way stops the shoelaces from snagging, keeping you safe when moving.
On the other hand, army lacing does not provide quite the same level of support as the ladder tying method.
There are many alternative ways that are demonstrably superior in stability and support.
Hiking Lacing
When hiking or bicycling, this technique minimizes the risk of the laces being tangled in bush and bike chains.
Pull the piece of string through the bottom two eyelets on the footwear, ensuring the two ending parts of the knot are on the exterior.
Thread the right shoelace end through the next eyelet on the right and into the shoe from the outside.
Thread the left shoelace from the outside to the third eyelet on the left.
Thread the threaded section on the right side of your shoe through the second eyelet on the left.
Insert from the exterior in the threaded portion on the right side of your footwear upward to the 5th eyelet on the right side.
Thread from the exterior in the string on the left footwear’s side up to the 4th eyelet.
Continue threading the eyelets until they are all threaded. Remember that two lace ends must be on the same side.
Bow Tie Lacing
Army lacing and bow tie tying are opposite. The similarity is you also begin to go in and out on the first crossings.
However, the cross is performed on the exterior rather than on the interior, as in the army tying technique.
Pull the string through the opposing hole after reaching it, then get the next diagonal eyelet from inside.
Pull out the lace and repeat the crossing on the exterior.
Straight-Bar Lacing
Straight-bar lacing method begins from the exterior, unlike the ones mentioned previously. Bring inwards through the first hole.
Always check that both ends are the same length.
Pull each end of the lace through the first vacant vertical hole after both ends of the string are on the inner side.
Pull the opposite side through the next diagonal hole while bypassing the first eyelet.
Remember that you’ll be moving vertically; there will be no crossover with this technique.
After pulling both sides outside, make a diagonal line and put the lace back inside.
This time, switch the skips around. The string that leaped the last cycle now passes through the first upright eyelet available.
The other string, which previously had not had to skip, accomplishes similarly this time while bypassing the first hole available.
Keep doing until there is no more string, and remember that there should be no crossings when you apply this technique.
How To Tie A Pair Of Navy Boots?
The various lacing methods offer your shoes a distinct aesthetic. Most importantly, they aid in the comfort and support of your feet.
Not only soldiers but also everyone can benefit from navy boot lacing techniques.
Keep reading to learn the most common technique to lace navy boots:
Look For The Greatest Bootlace.
Because your boots will almost certainly touch your ankles, you’ll need long laces.
The ideal length is determined by various factors, including the eyelet number, lacing style, eyelet spacing, and foot size.
For instance, if your boots have 5-6 eyelet pairs, a 54-inch lace is suitable. A 63-inch string will be ideal for 7-8 eyelet pairs.
If you have one more eyelet set, you should increase the length of the lace by about 9 inches.
Begin Tying The Shoelaces.
A criss-cross pattern is among the most popular ways to start this technique.
Thread the laces through the bottom eyelets, starting at the lowest.
Bring the strings vertically and measure the ends to ensure they are equal.
The strings should now be on the exterior of the holes when this stage is complete.
Cross One Shoelace End Diagonally Across The Boot Tongue.
Thread the laces through the second hole, pull it through, and repeat it. The laces must be on the shoe exterior.
Thread laces beneath and through the holes, not at the top, for a traditional criss-cross.
Keep Lacing.
To make the pattern beautiful until you approach the boot top, thread one lace side before another.
Keep crossing the strings from right to left on the first hole. Make the reverse design for the second navy boot for a more symmetrical effect.
You can quickly tie the laces and keep your boots looking neat if you thread consistently.
Lace Up The Front.
Avoid feeding the strings through the final hole if you want additional space at the upper for the feet.
Knot your straps or hide them inside the boots when you get to the peak.
You may even wrap the knots around the ankles before fastening them if the laces are long.
If you want to learn more tips to tie this footwear, you can watch this video.
In A Nutshell
This article has eventually guided you on how to lace navy dress shoes? Hopefully, these techniques will be helpful for you.
In conclusion, you can apply various ways to lace your footwear, such as ladder lacing, cross lacing, hiking lacing, or straight-bar lacing.
If you know other techniques, feel free to comment below. Thanks for reading, and see you in the next post!